THE WORKSHOP GUIDE / TUBE NOTCH STUDIO
A clear path to the bench.
Prepare your model, review the joint, and turn the result into a useful wrap. Start with the demo assembly before your first project.
Start with a model or a manual notch.
Open Tube Notch Studio from your account. Choose Load demo assembly to explore the member list, original CAD view and calculated cuts. The demo gives you a known assembly to learn with.
For a CAD assembly
- Export a STEP or STP file from your CAD software. Keep each straight tube as a separate solid and preserve its assembly position.
- Choose Import CAD, select the file and run the analysis. The file is processed locally in your browser.
- Read the import notes. Supported members appear in the list; unsupported geometry and ambiguous conditions are reported for review.
Without a CAD file
Use Quick notch to enter the tube and receiver dimensions, angle and offset. You can create a planar cut or a two-ended layout with relative clocking. The preview updates as you work.
A STEP import generates member labels in traversal order. Rename parts to match your drawings or cut list. Original CAD geometry remains available for comparison.
Know what the importer can read.
| Input | Current support |
|---|---|
| STEP / STP | Straight circular stock, separate placed solids, recognised outside diameter, supported coaxial bore and end contours. |
| Centerline CSV | Tube endpoints and dimensions with explicit unit handling. |
| ASCII DXF | Model-space LINE centerlines with explicit units and tube diameter assignment. |
| Project JSON | A portable Tube Notch Studio project backup. |
The file limit is 25 MB, with an analysis limit of 300 recognised members. Larger or more complex assemblies may need to be split into smaller fabrication groups.
Bent tubes, square or oval stock, fused multi-axis parts, curved receivers and complex stepped members are outside the current workflow. Modeled end extraction requires supported closed exterior rims; side holes and open slots can invalidate that representation.
STL, IGES and native CAD application files are not accepted. Export a STEP assembly. DXF blocks, splines, arcs, meshes and paper-space objects are not converted into tube members.
Review the joint before confirming it.
- Select a member and switch between Original CAD and Calculated cuts. Orbit the view and fade other tubes to see the connection.
- Inspect End A. Check the proposed receiving tube, axis angle, depth and seam direction. Choose a different receiver, a modeled end or a square end when appropriate.
- Repeat for End B. Both ends use the same A-to-B axis and circumferential seam reference.
- Confirm each end only after checking that the geometry matches your intended joint.
For overlapping straight stock, the app computes candidate cuts from the receiving cylinders. For supported tubes that were already trimmed in CAD, it can develop the modeled end contours directly.
Mark a single longitudinal datum on your tube. Keep the same zero-degree direction at both ends. Do not mirror the End B template. The reported finished envelope is the distance from the A outer tip to the B outer tip, not the distance between joint centres.
Changes to geometry or the seam clear previous confirmations. Review the updated result before exporting again.
Print, measure, then wrap.
- Open Wrap templates and select Letter, A4, A3 or Tabloid to match the paper you will use.
- Download the PDF. In the print dialog, choose Actual size / 100%. Disable page fitting. For browser printing, also disable browser headers and footers.
- Measure the calibration marks in both page directions. A correct screen preview does not guarantee that your printer has preserved scale.
- For tiled patterns, align the registration marks and coordinate labels before joining the sheets.
- Wrap the pattern around the stock with the 0° and 360° seam lines meeting. The shaded tape tab is extra paper, not extra tube circumference.
- Align both end patterns to the same seam and set their outer-tip datum planes at the calculated envelope distance.
Try the first wrap on scrap or a paper cylinder before marking your project stock. Templates describe nominal outside-surface geometry. Weld gaps, bevel preparation, kerf and machine compensation need to be handled for your process.
Keep the project and the handoff.
| Export | Use it for |
|---|---|
| Vector, full-scale wrap pages with calibration, seam and registration marks. | |
| SVG | Vector pattern geometry for inspection or a compatible drawing workflow. |
| DXF | Nominal A/B profiles in shared axial millimetre coordinates for CAM preparation. |
| CSV | A cut list to organise the fabrication work. |
| Project JSON | A portable backup that you can import in another browser or computer. |
Save project stores your work in the current browser. Browser storage can be cleared or run out of space; download a project backup for work you want to keep.
DXF export does not create machine-ready G-code. Your CAM setup still needs the correct cutting process, tool or torch orientation, compensation and machine configuration.
When something doesn’t look right.
A member is missing
Check the import notes, confirm it is straight round stock, and export it as its own solid. Fused junctions can hide the member boundaries the importer needs.
The wrong receiver is selected
Choose the intended tube in the end’s connection menu. Closely spaced or multi-member junctions can have more than one plausible interpretation.
The two ends seem clocked differently
Check the shared seam direction, the A-to-B orientation and any manual clocking input. Compare the original geometry and calculated result before confirming.
The printed wrap is too large or small
Measure the calibration marks, check Actual size / 100% and confirm the chosen paper size. Avoid fitting or shrinking the PDF to the printable area.